Milling Made Easy

Milling Made Easy

Manual Warrior Swing-blade Sawmill

Complete Warrior sawmill.

Now offered with the new 2018 cantilevered frame and lightweight beam design. Complete frame has been re-engineered to offer an extremely lightweight versatile system.

Includes: 

  • Electric start.

  • 2 x 6-tooth Turbokerf blades and sharpener.

  • Manual feed.

  • Manual blade swing.

Specs:

  • Single end horizontal sizing. Double end vertical sizing.

  • Log setup taper alignment included.

  • 1 meter diameter (3 foot) log - although any diameter may be sawn.

  • 4.2 meter (14 foot) log cut length.

  • Double cut capable.

Pricing (+Local domestic freight):

Honda petrol power plant:

  • Model 6 (6" x 6" standard cut, 5" x 12" double cut), fitted with Honda Petrol 13hp GX390 (pull start included) engine. $11,800 USD.

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Honda Petrol 13hp GX390 (pull start included) engine. $14,000 USD.

  • Model 6 (6" x 6" standard cut, 5" x 12" double cut), fitted with Honda Petrol 22hp GX690 engine. $13,300 USD.

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Honda Petrol 22hp GX690 engine. $15,500 USD.

 Electric power plant:

  • Model 6 (6" x 6" standard cut, 5" x 12" double cut), fitted with 3-phase electric 10hp motor DOL. $13,300 USD.

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with 3-phase electric 10hp motor DOL. $15,500 USD.

What makes our mills stand out?

  • Open access to load your logs and remove timber (without the possibility of damaging your tracks. You're not stuck in a portal restricting your options.

  • The mono rail means you're mill will always pull straight - its not dependent on how or where you pull. It will cut straight no matter what.

  • Our mills now have a 40hp capacity heavy duty Curtis gearbox (made in the US). The driven pulley is also mounted on the other side of an outrigger bearing - meaning the pressure provided by the belt is off the gearbox. This is the number one fault with most swing blade sawmills.

  • We have full taper ability along with single end sizing, making our mills very easy to align to the log and to set you're sizes.

  • The swing apparatus is effortless. We also have weather board options available to coincide with its simplicity.

  • All our mills have the ability to double cut straight off the log - no turning the mill around (its designed into the concept). Our mills don't require any 180 degree swing function - this facility has no relationship to any extra ability regarding double cutting.

  • Portability. Our mills can be provided with a simple dolly trailer system. They can also be transported via a small jockey arrangement optional with the sawmill. They do break down too. Lots of options for easy 10-30 minute setup/breakdown.

  • A major hidden advantage with our saw is that there is no need to start vertical first followed by horizontal as your finishing cut. Simply start horizontal and finish with vertical - no wedging required. Just grab your cut timber and start again.

  • Sharpening takes literally seconds with our simple 6-tooth saw blade. This design means our mills put LESS strain on the blade prolonging the life of your gearbox, bearings and belts.

  • We have thin-kerf, slabber and planer blade attachments available for all mills.

  • Saw any diameter logs.

  • Price, production, simplicity and portability - you cant beat it!