Milling Made Easy

Milling Made Easy

M12HD-37A - 03.jpg

Pre-purchase now!

Receive 10% discount if you pre-purchase (an automated mill) for a show near you.

Receive hands on training.

Drive away with your mill at the show.

Email us now if you have a major show near you in mind.

Automated Warrior Swing-blade Sawmill

Complete Warrior sawmill.

A revolutionary swing blade sawmill that makes the process of milling logs into timber a joy. The operator controls the feed rate through a lever at the end of the beam, allowing 100% speed control while the saw cuts. The operator has total control operating from a single point. Simply swing the blade, power the saw through the cut until the blade swings automatically at the other end. Power the saw back revealing a sawn board. An incredibly versatile, easy to use portable sawmill. We’ve brought the swing blade technology into the 21st century!

Includes: 

  • Electric start.

  • jockey transport wheels.

  • 1 x 4-tooth INSERT blade, tool, extra tips and sharpener.

  • Power feed.

  • Auto remote blade swing.

  • Operable in both auto and manual mode.

Specs:

  • Single end vertical and horizontal sizing.

  • Log setup taper alignment included.

  • 1.3m diameter (4 foot) log - although any diameter may be sawn.

  • 6m (20ft) log cut length.

  • Double cut capable.

Pricing(+Local domestic freight):

Petrol power plant:

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $23,000 USD (Additional $1,500 includes delivery via airfreight for collection at your nearest airport, all cost covered).

  • Model 10 (10" x 10" standard cut, 9" x 20" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $26,500 USD (Additional $1,500 includes delivery via airfreight for collection at your nearest airport, all cost covered).

  • Model 12 (12" x 12" standard cut, 11" x 24" double cut), fitted with Honda Petrol 27.5hp (gross) engine. $35,000 USD (Additional $1,500 includes delivery via airfreight for collection at your nearest airport, all cost covered).

  • Model 12HD (12" x 12" standard cut, 11" x 24" double cut), fitted with Kohler Petrol 40hp (gross) engine. $43,000 USD (Additional $2,000 includes delivery via airfreight for collection at your nearest airport, all cost covered).

    • NEW Model 12HD

      • Can be upgraded to PLC computer setworks. $10,000 USD.

      • Warrior ‘heavy duty’ frame with canti-levered beam.

      • Heavy duty drive train installed.

      • Extend to very long lengths.

      • Board return system included standard.

Electric power plant:

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with 3-phase electric 15hp motor and soft start. $25,000 USD (Additional $1,500 includes delivery via airfreight for collection at your nearest airport, all cost covered).

  • Model 10 (10" x 10" standard cut, 9" x 20" double cut), fitted with 3-phase electric 15hp motor and soft start. $28,500 USD (Additional $1,500 includes delivery via airfreight for collection at your nearest airport, all cost covered).

  • Model 12 (12" x 12" standard cut, 11" x 24" double cut), fitted 3-phase electric 20hp motor and soft start. $37,000 USD (Additional $1,500 includes delivery via airfreight for collection at your nearest airport, all cost covered).

  • Model 12HD (12" x 12" standard cut, 11" x 24" double cut), fitted 3-phase electric 25hp motor and soft start. $47,000 USD (Additional $2,000 includes delivery via airfreight for collection at your nearest airport, all cost covered).

    • NEW Model 12HD

      • Can be upgraded to PLC computer setworks. $10,000 USD.

      • Warrior ‘heavy duty’ frame with canti-levered beam.

      • Heavy duty drive train installed.

      • Extend to very long lengths.

      • Board return system included standard.

Diesel power plant:

  • Model 8 (8" x 8" standard cut, 7" x 16" double cut), fitted with Kubota Diesel 24hp (net) D902 engine. $30,500 USD.

  • Model 10 (10" x 10" standard cut, 9" x 20" double cut), fitted with Kubota Diesel 24hp (net) D902 engine. $34,000 USD.

  • Model 12 (12" x 12" standard cut, 11" x 24" double cut), fitted with Kubota Diesel 24hp (net) D902 engine. $42,000 USD.

  • Model 12HD (12" x 12" standard cut, 11" x 24" double cut), fitted with Kubota Diesel 24hp (net) D902 engine. $50,000 USD.

    • NEW Model 12HD

      • Can be upgraded to PLC computer setworks. $10,000 USD.

      • Warrior ‘heavy duty’ frame with canti-levered beam.

      • Heavy duty drive train installed.

      • Extend to very long lengths.

      • Board return system included standard.


 

What makes our mills stand out?

  • Open access to load your logs and remove timber (without the possibility of damaging your tracks. You're not stuck in a portal restricting your options.

  • The mono rail means you're mill will always pull straight - its not dependent on how or where you pull. It will cut straight no matter what.

  • Our mills now have a 40hp capacity heavy duty Curtis gearbox (made in the US). The driven pulley is also mounted on the other side of an outrigger bearing - meaning the pressure provided by the belt is off the gearbox. This is the number one fault with most swing blade sawmills.

  • We have full taper ability along with single end sizing, making our mills very easy to align to the log and to set you're sizes.

  • The swing apparatus is effortless. We also have weather board options available to coincide with its simplicity.

  • All our mills have the ability to double cut straight off the log - no turning the mill around (its designed into the concept). Our mills don't require any 180 degree swing function - this facility has no relationship to any extra ability regarding double cutting.

  • Portability. Our mills can be provided with a simple dolly trailer system. They can also be transported via a small jockey arrangement provided with the sawmill. They do break down too. Lots of options for easy 10-30 minute setup/breakdown.

  • A major hidden advantage with our saw is that there is no need to start vertical first followed by horizontal as your finishing cut. Simply start horizontal and finish with vertical - no wedging required. Just grab your cut timber and start again.

  • Sharpening takes literally seconds with our simple 6-tooth saw blade. This design means our mills put LESS strain on the blade prolonging the life of your gearbox, bearings and belts.

  • We have thin-kerf, slabber and planer blade attachments available for all mills.

  • Saw any diameter logs.

  • Price, production, simplicity and portability - you cant beat it!