Milling Made Easy

Milling Made Easy

Accessories(+Local domestic freight).

  1. MANUAL MILL BEAM EXTENSION Per 1m. Includes insert connectors and round tube with clamps. 1m section of beam. 3 inserts, 12 screws, alloy tube, 2 clamps. $500 USD.

  2. AUTO MILL BEAM EXTENSION Per 1m. Includes insert connectors and round tube with clamps. 1m section of beam. 4 inserts, 16 screws, alloy tube, 2 clamps. $650 USD.

  3. RADIAL MASTER BEAM EXTENSION Per 1m. Includes insert connectors, round tube with clamps, trailer extensions. 1m section of beam. 4 inserts, 16 screws, alloy tube, 2 clamps. Trailer. $1,500 USD.

  4. GLADIATOR  BEAM EXTENSION Per 1m. Includes insert connectors, round tube. 1m section of beam. Tube. $800 USD.

  5. TOW TRAILER Transport trailer to fit all mills. Includes dolly trailer and hold down clamps to connect to your sawmill for easy farm transport. $3,000 USD.

  6. DEDICATED SLABBER SAWMILL Complete dedicated slabbing system to cut wide slabs (61" x 8"). 4.2m (13.7 feet) cut length in standard configuration or 6.2m with the extension fitted. Includes: double end taper sizing, 2  x RX27 chain loops and sharpener. GX390V (honda 13hp) standard. $10,000 USD.

  7. DEDICATED SLABBER CARRIAGE Dedicated slabbing system to cut wide slabs (61" x 8"). Comes as a rolling carriage only. Includes: 2  x RX27 chain loops and sharpener. GX390V (honda 13hp) standard. $7,500 USD.

  8. SLABBER ATTACHMENT Slabbing bar to attach to your sawmill. Fits in place of your circular blade (50" x 8".Includes: 2  x RX27 chain loops and oiler system. $2,800 USD.

  9. SLABBER CRADLE ONLY Trolley to fit to your existing beam. Can sit at the other end of the mill. Fits your standard Alaskan kit. Trolley only with remote throttle. $1,100 USD.

  10. PLANER BLADE Planer blade for re-surfacing slabs and beams. Process is done after your product has dried. Provides a finished result. 6 tooth planer blade with 6 extra removable carbide tips. $1,500 USD.

  11. CANTHOOK Handy tool for rolling logs. 1 x Canthook $200 USD.

  12. PUSH BUTTON 12V CONTROL Fits all automated Warrior models. Bush button sizing for horizontal and vertical movement. Control station with extra 12v battery. Lift and horizontal motor and gearbox kit. $3,000 USD.

  13. RADIAL MASTER LEG EXTENSIONS Extended legs to allow the Radial Master frame to cantilever over very large logs to be milled seperately to the turning system. 2 x extension legs. $1,000 USD.

  14. RADIAL MASTER GENERATOR Honda 3kva generator for mobile operations. $4,000 USD.

  15. RETIPPING JIG Re-tipping jig to assist in welding on sawblade tips. Holds the tooth while it is welded to the blade. Re-tipping jig and 20 extra tips. $500 USD.

  16. JOCKEY KIT Jockey frame and wheels to fit under your mill for easy setup. $300 USD.

  17. 6" SAWBLADE 3 tooth, 4.75mm kerf. 1 x blade. $300 USD.

  18. 8" SAWBLADE 4 tooth, 5.7mm kerf. 1 x blade. $500 USD.

  19. 10" SAWBLADE 4 tooth, 6.1mm kerf. 1 x blade. $650 USD.

  20. 12" SAWBLADE 3 tooth, 6.5mm kerf. 1 x blade. $1,300 USD.

  21. 6" SAW TIP Standard 4.75mm kerf. 1 x tip. $7 USD.

  22. 8" SAW TIP Standard 5.7mm kerf. 1 x tip. $7 USD.

  23. 10" SAW TIP Standard 6.1mm kerf. 1 x tip. $8 USD.

  24. 12" SAW TIP Standard 6.5mm kerf. 1 x tip. $10 USD.

  25. PLANER BLADE SAW TIP Standard planer blade carbide. 1 x tip. $15 USD.